Eaves and Ridge Skylights
The eaves skylight is an extension of our Flushglaze skylight for those looking to take maximum daylight to the ultimate level.
We design and manufacture as separate glazed units, then simply install and seal the joins using our modular support systems. The main join as the vertical section meets the horizontal section is so sleek as to not obstruct the view. Similarly the ridge skylight is a dual pitched skylight with a silicone seal at the apex join again to avoid obstructing views.
Using this technology keeps framework to a minimum, no external framework means nowhere for water to track = no leaks.
Both configurations are available as standard options, however custom options for larger requirements joined together with back to back angles can be achieved.
Take a look at the our Flushglaze® Eaves/Ridge Skylight specification details below
Center Pane U-factor: 0.19
Color: RAL7015 Slate Grey
Glass Specification: Minimum 1/4″ Clear Heat Soak Tested Toughened – 5/8″ Argon Filled Cavity With Warm Edge Spacer Bar – 1/4″ Clear Heat Soak Tested Soft Low E Toughened (laminate option available)
Max Area: Up to 55.9 Sq ft
- BBA approved and certified skylight
- No visible internal framework
- No external capping
- Heat soak tested low e safety glass as standard
- Modular options available for larger areas
- Ritec Clearshield (easy clean)
- Curb Top Trim (hides Curb from above)